Introduction to the Program

Comprender las características de la instrumentación y los sensores en los sistemas electrónicos será fundamental para manejarse con soltura en la creación de este tipo de aparatos”

La industria a gran escala se basa en el empleo continuado de maquinaria y procesos controlados a través de dispositivos mecánicos y electrónicos. Para ello, es preciso el uso de la electrónica y de los sistemas de instrumentación y los sensores. De esta manera, el avance en este campo ha favorecido también la mejora de la maquinaria industrial. Es por ello que muchos ingenieros quieren especializarse en este campo, con programas de primer nivel con los que ser capaces de detectar, desde una primera intervención, cuál es el problema para poder solventarlo con éxito.

Este Postgraduate certificate en Instrumentation and Sensors de TECH viene a resolver esa demanda de los ingenieros electrónicos y, para ello, el programa analiza los diferentes tipos de sensores y actuadores que se encuentran en los procesos de carácter industrial y concreta los tipos de sistemas de control a fin de comprender la intervención de un dispositivo actuador en función de una variable física o química a medir. La distribución de temas establecidos desarrolla, de manera coherente y organizada, el funcionamiento de estos dispositivos desde dos perspectivas: la visión científica de los fenómenos que intervienen y las aplicaciones prácticas.

Un programa académico que profundiza en los aspectos más relevantes y útiles que deben conocer los profesionales para poder aplicarlos a su práctica diaria, llegando a convertirse en profesionales de referencia en el sector. Además, al ser 100% online, permitirá a los alumnos distribuir su tiempo de estudio, al no estar condicionado por horarios fijos ni tener la necesidad de trasladarse a otro lugar físico, pudiendo acceder a todos los contenidos en cualquier momento del día, equilibrando su vida laboral y personal con la académica.

Tu esfuerzo en el ámbito de la instrumentación y los sensores permitirá mejorar diferentes procesos industriales”

Este Postgraduate certificate en Instrumentation and Sensors contiene el programa más completo y actualizado del mercado. Sus características más destacadas son:

  • El desarrollo de casos prácticos presentados por expertos en ingeniería 
  • Los contenidos gráficos, esquemáticos y eminentemente prácticos con los que están concebidos recogen una información científica y práctica sobre aquellas disciplinas indispensables para el ejercicio profesional
  • Los ejercicios prácticos donde realizar el proceso de autoevaluación para mejorar el aprendizaje
  • Su especial hincapié en metodologías innovadoras en Instrumentación y Sensores
  • Las lecciones teóricas, preguntas al experto, foros de discusión de temas controvertidos y trabajos de reflexión individual
  • La disponibilidad de acceso a los contenidos desde cualquier dispositivo fijo o portátil con conexión a internet

Un completísimo programa académico que te ayudará a especializarte en Instrumentation and Sensors”

Incluye en su cuadro docente a profesionales pertenecientes al ámbito de la Engineering, que vierten en este programa la experiencia de su trabajo, además de reconocidos especialistas de sociedades de referencia y universidades de prestigio.

Su contenido multimedia, elaborado con la última tecnología educativa, permitirá al profesional un aprendizaje situado y contextual, es decir, un entorno simulado que proporcionará un estudio inmersivo programado para entrenarse ante situaciones reales.

El diseño de este programa se centra en el Aprendizaje Basado en Problemas, mediante el cual los alumnos deberán tratar de resolver las distintas situaciones de práctica profesional que se les planteen a lo largo del curso académico. Para ello, contarán con la ayuda de un novedoso sistema de vídeo interactivo realizado por reconocidos expertos. 

Accede a los recursos teórico-prácticos de este Postgraduate certificate de manera ilimitada. Solo necesitas un ordenador o dispositivo móvil con conexión a internet”

La modalidad online de este programa permitirá a los alumnos compaginar su vida académica y laboral”

Syllabus

Engineers who enroll in this TECH Postgraduate certificate will be able to take a self-guided tour through the most up to date concepts and procedures of the moment. In this way, students will learn about different types of tools, such as flow, pressure and temperature sensors; physical and chemical variable sensors; types of automatic regulators or control applications in industry. All of these aspects are of great relevance for professionals in the sector. 

The most complete and up-to-date syllabus on the current academic scene"

Module 1. Instruments and Sensors

1.1. Measurement 

1.1.1. Measurement and Control Characteristics 

1.1.1.1. Accuracy 
1.1.1.2. Loyalty 
1.1.1.3. Repeatability 
1.1.1.4. Reproducibility 
1.1.1.5. Derivatives 
1.1.1.6. Linearity 
1.1.1.7. Hysteresis 
1.1.1.8. Resolution 
1.1.1.9. Scope 
1.1.1.10. Errors 

1.1.2. Classification of Instruments 

1.1.2.1. According to its Functionality 
1.1.2.2. According to the Variable to Control 

1.2. Regulation 

1.2.1. Regulatory Systems 

1.2.1.1. Open Loop Systems 
1.2.1.2. Closed Loop Systems 

1.2.2. Types of Industrial Processes 

1.2.2.1. Continuous Processes 
1.2.2.2. Discrete Processes 

1.3. Caudal Sensors 

1.3.1. Flow Rate 
1.3.2. Units Used for Caudal Measurement 
1.3.3. Types of Caudal Sensors 

1.3.3.1. Volume Flow Measurement 
1.3.3.2. Flow Measurement by Mass 

1.4. Pressure Sensors 

1.4.1. Pressure 
1.4.2. Units Used for Pressure Measurement 
1.4.3. Types of Pressure Sensors 

1.4.3.1. Pressure Measurement via Mechanical Elements 
1.4.3.2. Pressure Measurement via Electromechanical Elements 
1.4.3.3. Pressure Measurement via Electronic Elements 

1.5. Temperature Sensors 

1.5.1. Temperature 
1.5.2. Units Used for Temperature Measurement 
1.5.3. Types of Temperature Sensors 

1.5.3.1. Bimetallic Thermometer 
1.5.3.2. Glass Thermometer 
1.5.3.3. Resistance Thermometer 
1.5.3.4. Thermistors 
1.5.3.5. Thermocouples 
1.5.3.6. Radiation Pyrometers 

1.6. Level Sensors 

1.6.1. Liquids and Solids Level 
1.6.2. Units Used for Temperature Measurement 
1.6.3. Types of Level Sensors 

1.6.3.1. Liquid Level Gauges 
1.6.3.2. Solid Level Gauges 

1.7. Sensors for Other Physical and Chemical Variables 

1.7.1. Sensors for Other Physical Variables 

1.7.1.1. Weight Sensors 
1.7.1.2. Speed Sensors 
1.7.1.3. Density Sensors 
1.7.1.4. Humidity Sensors 
1.7.1.5. Flame Sensors 
1.7.1.6. Solar Radiation Sensors 

1.7.2. Sensors for Other Chemical Variables 

1.7.2.1. Conduction Sensors 
1.7.2.2. pH Sensors 
1.7.2.3. Gas Concentration Sensors 

1.8. Actuators 

1.8.1. Actuators 
1.8.2. Engines 
1.8.3. Servo-Valves 

1.9. Automatic Control 

1.9.1. Automatic Regulation 
1.9.2. Types of Regulators 

1.9.2.1. Two-Step Controller 
1.9.2.2. Provider Controller 
1.9.2.3. Differential Controller 
1.9.2.4. Proportional-Differential Controller 
1.9.2.5. Integral Controller 
1.9.2.6. Proportional-Integral Controller 
1.9.2.7. Proportional-Integral-Differential Controller 
1.9.2.8. Digital Electronic Controller 

1.10. Control Applications in Industry 

1.10.1. Selection Criteria of a Control System 
1.10.2. Examples of Typical Controls in Industry 

1.10.2.1. Ovens 
1.10.2.2. Dryer 
1.10.2.3. Combustion Control 
1.10.2.4. Level Control 
1.10.2.5. Heat Exchangers 
1.10.2.6. Central Nuclear Reactor

A top-level academic journey that will help you open up new career opportunities”

Postgraduate Certificate in Instrumentation and Sensors

Nowadays, the measurement and control of physical variables are essential in different fields of industry and research. ThePostgraduate Certificate in Instrumentation and Sensors of TECH Global University focuses on educating the student in the management of data acquisition and processing systems, as well as in the application of different measurement and control techniques. This university program offers a complete education in the design, implementation and assessment of instrumentation and sensor systems, applicable to different areas of engineering, physics, chemistry and biotechnology.

The Postgraduate Certificate in Instrumentation and Sensors offers a complete education in the design, implementation and assessment of instrumentation and sensor systems, applicable to different areas of engineering, physics, chemistry and biotechnology.

The Postgraduate Certificate in Instrumentation and Sensors offers a complete education in the design, implementation and assessment of instrumentation and sensor systems, applicable to different areas of engineering, physics, chemistry and biotechnology.

The Postgraduate Certificate in Instrumentation and Sensors of TECH Global University is designed to provide students with a theoretical and practical education that allows them to acquire skills in the design and development of high-precision measurement and control systems, applied in different environments. In this university program, the student will learn the theoretical foundations of sensors and transducers, as well as their calibration and characterization techniques. In addition, students will study in depth the different instrumentation techniques, such as analog and digital electronics, virtual instrumentation and microelectronics, among others. With the Postgraduate Certificate in Instrumentation and Sensors of TECH Global University, the student will be able to face the challenges of measurement and control of physical variables in various contexts.